I fixed my pantry with drawers

When my husband and I purchased our house around the time we got married, our lives were…. different. To say the least - ha. We knew we wanted to have children but it seemed far away. We purchased the house mostly as a fixer upper that happened to be in a lovely neighborhood. Fast forward almost 15 years and we’re still there. The formerly sparse spare rooms and office are now filled with books, toys, baseball cards, princess beds and MLB posters. We wouldn’t have it any other way.

But while the kitchen made perfect sense for two, it’s bursting at the seams with five. There’s perhaps no area more evident of that than the pantry (or lack of pantry). We have one small cabinet for our ‘pantry,’ and for now, it’s going to have to do. We love our neighborhood, our school, our yard, so we aren’t leaving this house. And until we win the lottery, we spend months and months saving up for renovaction projects. So, I’m constantly looking for creative ways to maximize the space we have.

Hence, the pantry cabinet makeover. Our cabinet is very deep, which is great for storing extra stuff. The problem is that said ‘stuff’ gets forgotten in the back of that deep cabinet, goes back, then gets trashed. One day, after sorrowfully throwing away a paycheck’s worth of groceries, it dawned on me to install drawers in the cabinet. I’m not a handy gal per se, but was determined to do this myself, rather than nagging my handy husband to do it. (Don’t worry, there are plenty of other projects I’m nagging him about.) And, I’m happy to report, I was successful! HERE is the drawer kit I used. Once I figured out the process, it went quickly. Here are the steps:

  1. Screw the side brackets onto the drawers using the flat screws provided in the box. You’ll do this on both sides. In order to find all three holes, you have to slide the bracket back and forth until the holes on the bracket and on the drawer match up.

  2. Remove the shelf from your cabinet and screw in the four holes on the brackets into the drawer.

  3. Screw in two L-Brackets onto the bottom back edge of the shelf (NOT provided, I purchased THESE separately after realizing the drawers made the shelves too heavy. When you pulled out a drawer full of food, the entire shelf started tipping out of the cabinet.)

  4. Place the shelf at desired level, then screw the other side of the L-Bracket into the back wall of your cabinet.

I recommend planning your shelf contents before screwing the shelves into the cabinet to make sure there’s space on the shelf for the items you’re intending for them. I see you Sams-sized cereal boxes!

Altogether, the project probably took me 4 hours, including a full deep clean and organization of our pantry items. After using the drawers for a few weeks, I can report that they make a gigantic difference and the cabinet feels exponentially more usable,

Next
Next

Before you blame your camera, let’s talk lighting